Networking, Introduction, In this chapter – Tyco 4100U User Manual
Page 81: Chapter 5 networking -1, Introduction -1, In this chapter -1, Chapter 5 networking

5-1
A standalone or MINIPLEX 4100 system becomes a network node when a 4100 Network
Interface Card (NIC) or other compatible network card is installed and connected to
another network node. How network cards connect to each other depends on the type of
media network cards being used.
Refer to the page number listed in this table for information on a specific topic.
Topic
See Page #
Introduction to the 4100 Network Interface Card (NIC)
Step 1. Configuring Network Cards
Step 2. Mounting Media Cards to the NIC
Step 3. Mounting Network Cards
Chapter 5
Networking
Introduction
In this Chapter