Multi-use controls – Tektronix 1740A/1750A User Manual

Page 32

At A Glance

1740A/1750A Series Waveform/Vector Monitor User Manual

2-2

H Turn off instrument power.
H Depress and hold the

CLEAR MENU

and

WAVEFORM

buttons while you turn instrument power on again. Hold
both buttons in until the instrument returns to its normal
operating state.

H If this reset does not unlock the controls, contact your

Tektronix field office or call Tektronix at the phone
number listed in the front of this manual.

Multi-Use Controls

H The center three controls located under the CRT

have functions assigned and labeled through the
on-screen menus and readouts. These controls will
be referred to as

Bezel Controls. See Figure 2-1.

H Five small buttons along the right side of the CRT

enable users to make selections when on-screen
menus are in use. These buttons will be referred to
as

Bezel Buttons.

VERTPOS

HORIZPOS

Three Bezel Controls

CLEAR

Five

Bezel

Buttons

Figure 2-1. Multi-Use Bezel Controls and Buttons.