Toshiba VF-S11 - Manual (Page 58)

E6581160
57
7
Title
Communication
No.
Function Unit
Minimum
setting unit
Panel/Commun
ication
Adjustment range
Default
setting
User
setting
Reference
E6581158
0: Supply voltage uncorrected, output
voltage limited
1: Supply voltage corrected, output
voltage limited
2: Supply voltage uncorrected, output
voltage unlimited
H 0307 Supply voltage
correction
(limitation of
output voltage) - -
3: Supply voltage corrected, output
voltage unlimited
2
(WP, WN)
3 (AN)
6.13.6
H 0308 Dynamic braking
resistance Ω 0.1/0.1 1.0-1000 * 1 6.13.4
H 0309 Dynamic braking
resistor capacity kW 0.01/0.01 0.01-30.00 * 1 6.13.4
H 0311 Reverse-run
prohibition - - 0: Forward/reverse run permitted
1: Reverse run prohibited
2: Forward run prohibited 0 6.13.7
H 0312 Random mode - - 0: Disabled
1: Automatic setting 0 6.12
0: Carrier frequency not reduced
automatically
1: Carrier frequency reduced
automatically
2: Carrier frequency not reduced
automatically
Support for 500V/600V models
H 0316 Carrier frequency
control mode
selection - -
3: Carrier frequency reduced
automatically
Support for 500V/600V models
1 6.12
H 0320 Droop gain ％ 1/1 0-100 0 6.14
H 0323 Droop insensitive
torque band ％ 1/1 0-100 10 6.14
H 0342 Braking mode
selection - - 0: Disabled
1: Enabled (forward run)
2: Enabled (reverse run)
3: Enabled (operating direction) 0 6.15
H 0343 Release
frequency Hz 0.1/0.01 H -20.0 3.0
H 0344 Release time s 0.01/0.01 0.00-2.50 0.05
H 0345 Creeping
frequency Hz 0.1/0.01 H -20.0 3.0
H 0346 Creeping time s 0.01/0.01 0.00-2.50 0.10
H 0359 PID control
waiting time s 1/1 0-2400 0 6.16
H 0360 PID control - - 0: Disabled, 1: Enabled 0
H 0362 Proportional gain - 0.01/0.01 0.01-100.0 0.30
H 0363 Integral gain - 0.01/0.01 0.01-100.0 0.20
H 0366 Differential gain - 0.01/0.01 0.00-2.5 0.00
*1 : Default values vary depending on the capacity. See the table of 64.