Toshiba TDP-PX10 - Manual (Page 44)

44
Lamp replacement (Continued)
Notes and Precautions
• The [ Lamp time ] item in the Status display menu indicates the time of lamp use (as a
rough guide).
• It is recommended that the lamp be replaced after 2,000 hours of use. When [ Lamp
time ] ! reaches 2,000 hours, a message will appear. (After 2,000 hours, the message will
appear when the power is first turned on after each 100 hour period of use.) This ! display
disappears when you press the [MENU] button.
• Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, ! the
projector may fail to be powered on or the lamp may fail to come on.
• Always replace the lamp with a new one.
• The lamp is made out of glass. Do not touch the glass surface with your bare hands,
bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)
Used Lamps
This projector's lamps contain trace amounts of environmentally harmful inorganic
mercury. Be careful not to break used lamps, and dispose of them in accordance with
local regulations.
p.37