Using the menus (continued), Default setting menu – Toshiba TDP-PX10 User Manual
Page 36
36
Using the menus (continued)
Default setting menu
Note
•
Set the [
Fan mode
] to [
High
] when using the projector at the high altitude (higher than
600m or 2,000 ft.). In the mean time, the system will set the [
Lamp power
] to [
Low
]
automatically, and is not allowed to change the setting. Do not set
Fan mode
to [
High
]
when using the projector at a lower altitude.
•
If [
Power on
] is set to [
Auto
] and there is a power outage, the projector will come on
once power is restored.
Item
Description
RGB
Y/P
B
/P
R
Video
S-video
USB
Projection mode
Sets projection mode in accordance with
Placement Styles.
(Standard)
(Rear)
Yes
Yes
Yes
Yes
Language
Select one of the languages below for the menu
and messages.
[
: Enter setting mode]
J
[
:Selection]
J
[ :
Apply]
Yes
Yes
Yes
Yes
Start-up screen
Display start-up screen when power is turned on.
On
Off
Yes
Yes
Yes
Yes
Auto input search
Set whether the input with signals is only
selected or not.
On
Off
Yes
Yes
Yes
Yes
Fan mode
[See note below]
Sets the cooling fan speed.
Normal
High
Yes
Yes
Yes
Yes
Lamp power
[See note below]
Sets the lamp power.
Normal
Low
Yes
Yes
Yes
Yes
Power on
[See note below]
Sets whether to turn on the power when the
ON/
STANDBY
button is pressed (Manual), or when
the power is supplied (Auto).
Manual
Auto
Yes
Yes
Yes
Yes
Reset all
Press
. (The language is not reset.)
Resets all adjustments and settings to their
factory settings.
Yes
No
Yes
Yes
Yes
Yes
p.24
English/ Français/ Español/ Português