Toshiba TDP-PX10 - Manual (Page 21)

21
Pre
p
arations
Preparing and using the remote control
„ Loading dry-cell batteries into the
remote control
M Remove the battery cover.
N Insert the dry-cell batteries.
Be sure to align the plus and minus
ends of the batteries properly.
Two alkaline batteries (LR03, SIZE AAA)
are used.
O Replace the battery cover.
„ Operating the remote control
Turn on the ON/OFF switch of the remote
control.
Point toward the projector’s infrared
remote sensor, and press a button on
the remote control.
• Operating the projector from the front
• Operating the projector from the rear
Approx. 15 °
Approx. 5m
Approx. 15
°
Approx. 5m