Toshiba TDP-PX10 - Manual (Page 23)

23
Pre
p
arations
Operating a computer using the remote control
A computer can be operated using the projector ( s remote control. This function is available
on any computer with the Windows ® 98/98SE, Windows ® Me, Windows ® 2000, Windows ®
XP, or Windows Vista ® OS, that is equipped with a USB port which can support USB1.1
(The mouse remote control receiver is also supported on OS 9 or OS X for the Macintosh).
However, please note that Toshiba does not guarantee the operation of all computers.
Connecting a computer
Connect the mouse remote control receiver (supplied) to a computer.
The remote control may fail to operate if the
mouse remote control receiver is exposed to
bright sunlight or fluorescent lighting. In such
a case, change position or direction of the
mouse remote control receiver and retry.
Operating a computer
Operate remote control ( s buttons towards the mouse remote control receiver.
• Moving the mouse pointer
Press the mouse control button in the direction you wish the mouse pointer to move,
then press.
• To left click
Press the L-CLICK button.
• To right click
Press the R-CLICK button.
• To drag and drop
Holding down the L-CLICK button, move the mouse control button until the mouse
pointer is over the desired location, then release the L-CLICK button.
• Using the computer (s page up [K] and down [L] function
Press the PAGE+ and PAGE- buttons to switch PowerPoint ® slides.
Mouse remote control receiver
To USB port
Remote Control Front Remote Control Rear