Trane RT-PRC010-EN - Manual (Page 90)

RT-PRC010-EN 90
Notes:
1. Provide unrestricted clearance over the condenser fans.
2. A minimum clearance of 2’ 4-1/2” is required to open the hinged control panel
doors. Both doors swing outward in a 180-degree arc.
3. A minimum clearance of 2’ 10-3’4” is required to open the access doors on the unit’s
supply fan, evaporator, filter and exhaust fan sections. All hinged doors swing
outward in a 180-degree arc.
4. 90-130 ton models have two outdoor air intakes located at the back
of the unit and one small outdoor air intake located at
the end of the unit.
Dimensional
Data
Note The pedestal was purposely designed
Figure DD-4 — 90, 105, 115, 130 Ton Heating/Cooling and Cooling Only Rooftops
Figure DD-5 — 90 - 130 Tons — Service Clearance
(90 - 130 Tons)
(SEE NOTE 4)