beautypg.com

Features and benefits, Standard features, Optional features – Trane RT-PRC010-EN User Manual

Page 4: Field installed accessories

background image

RT-PRC010-EN

4

Features and
Benefits

Standard Features

• 20 to 130 ton industrial/ commercial

rooftops

• Fully integrated, factory-installed/

commissioned microelectronic
controls

• Unit mounted Human Interface Panel

with a 2 line x 40 character English
display and a 16 function key-pad that
includes Custom, Diagnostics, and
Service Test mode menu keys.

• Trane 3-D

®

Scroll compressors

(20 to 130 Tons)

• Compressor or circuit lead/lag

depending on unit

• Horizontal discharge/return duct

connections (SX, SL, SS models)

• CV or VAV control
• Low ambient compressor lockout

control on units with economizers

• FROSTAT™ coil frost protection on

all units

• Daytime Warm-up (Occupied mode)

on VAV models and Morning Warm-up
operation on all units with heating
options

• Supply air static overpressurization

protection on units with inlet guide
vanes and VFD’s.

• Supply airflow proofing
• Exhaust airflow proofing on units with

exhaust option

• Supply air tempering control
• Supply air heating control on VAV

modulating hot water or steam heat
units

• Emergency stop input
• Liquid and Discharge Service Valves
• Mappable sensors and setpoint

sources

• Occupied/Unoccupied switching
• Timed override activation
• Forward-curved supply fans
• Pitched roof over air handler section
• Stainless steel flue stack on gas heat

units

• 14-gauge, single-piece construction

base rails

• UL and CSA approval on standard

options

• Two-inch spring fan isolation

(90 to 130 tons)

• Meets 672 hours of salt spray testing in

accordance to ASTM B117 Standard

• Two inch standard efficiency

throwaway filters on 20 to 90 ton units
and two inch high efficiency
throwaway filters on 105 to 130 ton
units.

Optional Features

• Trane Communication Interface

Module: ICS interface control module

• Remote Human Interface Panel

(controls up to 4 units)

• Five ventilation override sequences
• Heating options: natural gas, electric,

hot water or steam

• Generic BAS interface
• Choose from three economizer control

options: comparative enthalpy,
reference enthalpy, dry bulb control

• Variable frequency drive control of

supply/exhaust fan motor

• Inlet guide vanes on FC supply fans

(VAV only)

• Outside air CFM compensation on VAV

units with IGV (or VFD) and economizer

• Hot gas bypass to the evaporator inlet
• Copper evaporator/condenser coils
• Suction service valves
• Replaceable core filter driers
• Phenolic coated evaporator/condenser

coils

• High capacity evaporator coils

(20 to 105 tons)

• Special paint colors
• Extended casing (SX models)
• Double wall access doors
• Double wall construction/perforated

double wall

• Stainless steel drain pan in evaporator

section

• Pitch evaporator drain pan
• Filter rack only (no filters)
• High efficiency throwaway filters
• 90-95 percent bag filters

• 90-95 percent cartridge filters
• Final filters
• Barometric relief
• 50 percent modulating exhaust with

forward-curved fans

• Trane’s air quality (Traq™) sensor
• Modulating Gas Heat
• 10 year limited warranty on Full

Modulation Gas Heat

• 100 percent modulating exhaust with

forward-curved fans

• 100 percent modulating exhaust with

FC fans and Statitrac™ direct space
sensing building pressurization control

• High duct temperature thermostats
• 0 F low ambient control
• 0-100 percent modulating fresh air

economizer

• Ultra low leak dampers for 0-100

percent modulating fresh air
economizers

• Dual electrical power connection
• Two-inch spring fan isolation

(20 to 75 tons)

• High efficiency motors
• U-frame motors
• Oversized motors
• Thru the door non-fused disconnect

with external handle

• Electrical convenience outlet
• Power supply monitoring
• Correction capacitors
• Horizontal or Roof discharge w/gas

heat (20-75 tons “F” style units only)

Field Installed Accessories

• Roof curbs
• Programmable sensors with night set

back — CV and VAV

• Sensors without night set back — CV

and VAV

• Remote zone sensors — used for

remote sensing with remote panels.

• ICS zone sensors used with Tracer®

system for zone control

• Outdoor temperature sensor for units

without economizers

• Remote minimum position control for

economizer

• Field installed module kits available for

field upgrade of controls