Thecus Technology Thecus N199 - Manual (Page 3)

3
Safety Warnings
For your safety, please read and follow the following safety warnings:
Read this manual thoroughly before attempting to set up your N199.
Your N199 is a complicated electronic device. DO NOT attempt to repair it
under any circumstances. In the case of malfunction, turn off the power
immediately and have it repaired at a qualified service center. Contact
your vendor for details.
DO NOT allow anything to rest on the power cord and DO NOT place the
power cord in an area where it can be stepped on. Carefully place
connecting cables to avoid stepping or tripping on them.
Your N199 can operate normally under temperatures between 5°C and
40°C, with relative humidity of 0% – 80%. Using the N199 under extreme
environmental conditions could damage the unit.
. Plugging the N199 to an incorrect power source could
damage the unit.
Ensure that the N199 is provided with the correct supply voltage (AC 100V
~ 240V, 50/60 Hz)
Do NOT expose the N199 to dampness, dust, or corrosive liquids.
Do NOT place the N199 on any uneven surfaces.
lace the N199 in direct sunlight or expose it to other heat DO NOT p
sources.
199. Unplug the power DO NOT use chemicals or aerosols to clean the N
cord and all connected cables before cleaning.
obstruct its ventilation slots to DO NOT place any objects on the N199 or
avoid overheating the unit.
Keep packaging out of the reach of children.
If disposing of the device, please follow your local regulations for the safe
disposal of electronic products to protect the environment.