Thecus Technology Thecus N199 - Manual (Page 11)

Rear Panel
The rear panel of the N199 houses the USB and Ethernet connections, as well as
the power connector. See the table below for descriptions of each:
Item Description
• Connect the included power cord to this connector Power Connector
• LAN port for connecting to an Ethernet network through a switch
or router
LAN Port
• USB 2.0 ports for storage expansion USB Ports
11
• eSATA port for high-speed storage expansion eSATA Port
• Resets the N199 Reset Button
• Press for five seconds during boot process to reset IP address and
admin password
• Use this to extend your wireless range by attaching an antenna
to it
Wireless Antenna
Slot
• Only available on N199 with wireless capability
• Connect a locking device here to secure your N199 Kensington
Security Slot