Thecus Technology Thecus N199 - Manual (Page 25)

Creating a RAID
To create a RAID volume, follow the steps below:
1. On the RAID Configuration screen, set the RAID storage space as JBOD,
RAID 0, or RAID 1 — see Appendix C: RAID Basics for a detailed
description of each.
2. Tick the checkboxes of the hard disks you wish to use to create a RAID.
3. Specify a stripe size — 64K is the default setting.
4. Press Create to build the RAID storage volume.
25
Deleting a RAID
To delete a RAID volume, follow the steps below:
1. On the RAID Configuration screen, click Remove.
2. The system automatically removes the RAID volume and you can create a
new RAID.
Folder Management
From the Storage menu, choose
Folder, and the Folder screen
appears. This screen allows you to
create and configure folders on the
N199 volume.
Folder
Item Description
Folder name
Displays the name of the folder.
Description Provides a description of the folder.
NFS Press NFS to setup access privilege.
ACL Press ACL (Access Control List) to configure which users have
access to this folder.
Edit Press Edit to enter the Edit screen and modify the folder’s
name and description.
Remove Press Delete to delete the folder. A screen appears asking to
confirm the deletion.
Add Press Add to enter the Add Folder screen.
Building a RAID storage space may take time, depending on the size of hard drives
and RAID mode.
NOTE
WARNING
Creating RAID destroys all data in the current RAID. The data is unrecoverable.
Removing RAID destroys all data in the current RAID. The data is unrecoverable.
WARNING