Thecus Technology Thecus N199 - Manual (Page 14)

4. Select the N199 that you like to configure. Click NEXT.
5. Login with the administrator account and password. The default account
and password are both “admin”. Click NEXT.
6. Name your N199 and configure the network IP address. If your switch or
router is configured as a DHCP Server, configuring the N199 to
automatically obtain an IP address is recommended. You may also use a
static IP address and enter the DNS Server address manually. Click NEXT
to continue.
7. Next, it’s time to change the default administrator password. Enter the
new password in the top blank, and repeat the password in the bottom
blank. Click APPLY to save your changes. Click END to go to the final step.
14