Texas Instruments 6100 - Manual (Page 65)

Connecting a Printer
Setting Up Your Desktop 4-15
Connecting a Printer Required cables/
connectors Most printers do not ship with a cable, so you
may need to buy one.
Most printers connect through the parallel port
on the computer using a standard,
Centronics™-type parallel cable.
Connecting to a
DockMate If you are connecting a printer to a DockMate,
connect it to the parallel port on the back of the
DockMate.
Connecting directly
to computer If you are connecting a printer directly to your
computer, connect it to the parallel port on the
back of the computer.
Installing a printer
driver Your operating system supports a wide range of
printers. If your printer is not supported by the
operating system, follow the instructions
provided with your printer to install a driver.
DockMate DockMate Plus
parallel port
parallel port
eug-4.frm Page 15 Saturday, January 25, 1997 10:32 AM