Texas Instruments 6100 - Manual (Page 37)

Installing Memory Modules
Installing Internal Accessories 3-3
Installing Memory Modules Tools required • Small, flat-blade screwdriver
• Wrist grounding straps (recommended)
Maximum memory Your computer has three slots for memory
modules and comes with a 32-MB module
standard in slot 2. The other two slots hold
8-MB or 32-MB modules. This gives your
computer a maximum possible memory of
96 MB.
Note: The computer is not compatible with
16-MB memory modules.
Preparing the
computer The installation procedure involves opening up
the computer. Before proceeding, follow these
steps to protect yourself and your computer.
1. Turn off the computer.
2. Disconnect the AC adapter from the
computer.
3. Remove all battery packs.
4. Ground yourself following the instructions
on the previous page.
Locating the
keyboard latches The keyboard has three small plastic latches
that hold it in place. These latches are along the
rear of the keyboard.
eug-3.frm Page 3 Thursday, January 23, 1997 3:26 PM