Toshiba ESTUDIO 60F - Manual (Page 25)

25
TX —transmission
DOC —in deposit
POL —polling
TR —ongoing commands
SMS —SMS transmission
Press M, 62 and OK . Use / to select a document
from the waiting queue and confirm with OK . Modify
the parameters and confirm with OK .
Immediate transmission
Press M, 61 and OK . Use / to select the docu-
ment in the waiting queue and confirm with Y or OK
to immediately perform the selected fax or SMS trans-
mission
.
Cancelling a transmission
Press M, 63 and OK . Use / to select the document
in the waiting queue and confirm with OK .
Printing a document
Press M, 64 and OK . Use / to select the document
in the waiting queue and confirm with OK .
Print the waiting queue
Press M, 65 and OK . A list of the documents queu-
ing for transmission will be printed .
Lock
You can block access to the keypad for numbers or to
the whole keyboard of your e-STUDIO60F .
Locking code
Insert the code that will be needed to temporarily un-
lock the keyboard .
1 Press M, 711 and OK .
2 Enter the four-digit interlock code and press OK .
3 Enter the code one more time and press OK .
When a code is already registered, the machine asks
you first to give the old code before allowing you to
modify it
.
Locking the keyboard
The access code must be entered each time the ma-
chine is used .
1 Press M, 712 and OK .
2 Enter the four-digit interlock code and press OK .
3 Use / to select WITH and press OK.
v After each operation, the machine locks automat-
ically .
To unlock the keyboard, enter WITHOUT in step
3 .
Locking numbers
You can also just lock the keypad for numbers with a
code . Transmissions are only possible from numbers
included in the directory .
1 Press M, 713 and OK .
2 Enter the four-digit interlock code and press OK .
3 Use / to select DIRECTORY ONLY and press OK.
v After each operation, the machine locks automat-
ically .
To unlock the keyboard, enter FREE in point 3 .
Care and maintenance
Cleaning the machine
Use a soft, fluff-free cloth lightly moistened with a little
alcohol (96%)
. Do not allow any moisture to enter the
machine .
Cleaning the scanner glass
1 Open the scanner without pressing the button .