Toshiba ESTUDIO 60F - Manual (Page 15)

15
WITHOUT —no transmission report; however, your
e-STUDIO60F notes all transmissions that took place
in its log (see Hints & tips / Logs)
.
ALWAYS —a report is printed with each transmission .
ON ERROR—a report is only printed if the transmission
failed or is abandoned .
2 Confirm with OK .
Delayed transmission
1 Press M, 31 and OK .
2 Enter the fax number and press OK .
3 Enter the time you want the fax to be sent (within 24
hours), e . g. 17 30 for 5 30 p . m. Press OK.
4 Set the contrast and other settings and confirm
each entry with OK .
Polling
By means of this function documents which have been
prepared for collection from another fax machine can
be retrieved
. You can also allow a document to be
polled from your fax machine .
Polling reception
1 Press M, 32 and OK .
2 Enter the polling number and press Y .
Delayed polling
1 Press M, 32 and OK .
2 Enter the polling number and press OK .
3 Enter the time (within 24 hours) you wish to poll
the document—e . g. 17 30 for 5 30 p . m.—and
press Y .
Polling transmission
You may place a document in your e-STUDIO60F and
make it available to one or more recipients who can ob-
tain a fax of this document by calling your e-STUDIO60F
with the polling function
.
1 Insert a document in the feeder .
2 Press M, 33 and OK .
3 Use / to choose between the two options:
SIMPLE —the document may be transmitted only once
(from the memory or feeder) . Press OK.
MULTIPLE —the document may be polled as many
times as necessary (from the memory) . Press OK.
4 If necessary, adjust the contrast and press OK .
5 Enter the number of pages and press OK (this is
only necessary when you have chosen MULTIPLE
above)
.
Additional telephone
You can connect an additional telephone on the same
line as your e-STUDIO60F . When a call comes in, the
additional telephone will ring a few times, then the
machine switches to fax reception
. If necessary, the
number of rings can be changed in the technical set-
tings (see Settings / Additional telephone)
.