Toshiba ESTUDIO 60F - Manual (Page 23)

23
Hints & tips
Paper feed
In case of a paper jam, try to pull out the paper . If this
is not possible, press M, 74 and OK to eject the pa-
per
.
If a document is not drawn in correctly by the automat-
ic feeder, press the button on the scanner cover and
open the scanner cover
.
Press the small lever and carefully remove the docu-
ment
.
Vertical stripes
If your e-STUDIO60F makes vertical stripes when cop-
ying, scanning or faxing, the scanner class might be
dirty
.
Horizontal stripes
When your e-STUDIO60F makes horizontal stripes
when copying, scanning or faxing, the scanner might
be locked
.
1 Open the printer cover .
2 Unlock the scanner with the lever on the underside
of the printer cover and close the machine .
The machine doesn’t print
If your e-STUDIO60F doesn’t print correctly, the reason
might be that the protective strips were not removed
completely from the printing cartridge
.
Open the printer cover and remove the cartridges . Re-
move film residue, replace the cartridges and close the
machine
.
Manual call
If sending a fax fails, you can check the line by using
the manual call function
.
1 Insert a document .
2 Press M, 35 and OK . The built-in loudspeaker will
be turned on and you should hear the dial tone .
3 Dial the desired number and press Y . You will be
able to hear how the connection is established .
Before you call the technical service
If you can’t solve your problem with the proposals
above, please unplug your e-STUDIO60F from the
mains and reconnect it after a few minutes .
Change cartridges
The display will indicate if one of the cartridges is emp-
ty .
Please use only original TOSHIBA ink cartridges!
1 Open the machine by pulling the lever under the
control panel .
2 The position of the cartridge holder will show you
which cartridge needs to be replaced . The arrows
point to the cartridge that is empty: