Toshiba ESTUDIO 60F - Manual (Page 20)

20
SMS
Your e-STUDIO60F lets you send SMS messages all
over the world . SMS (Short Message Service) was orig-
inally devised for mobile communication, but it is now
available in many countries via regular telephone lines
.
Availability of the SMS service depends on the coun-
try and operator . Your e-STUDIO60F has been pre-set
to use the SMS service in your country . If it does not
work correctly, please contact your SMS service pro-
vider and change these settings (see Advanced set-
tings / SMS settings)
.
Send SMS
One recipient
1 Press W twice.
2 Type the message you want to send .
To type capital letters, hold down + and press the de-
sired key . To type special characters, hold down CTRL
and press the desired key (e . g. to enter a question
mark, hold down CTRL and press V) . You can move
the cursor with / and delete characters with \ .
3 Press W.
4 Enter the telephone number .
If you want to send an SMS to a phone abroad, you
should dial the number in its international form (e
. g.
0049… for Germany) .
5 Press W to send the message . The e-STUDIO60F
will print a transmission report .
This function can be deactivated (see Fax / Send re-
port) .
Directory a
1 Press W twice.
2 Type your message and press W .
3 To select a number from the directory, press a
and use / to select an entry .
4 Press W to send your message.
Redial L
The last ten numbers dialled on the e-STUDIO60F will
be stored in the redial memory .
1 Press W twice and type your message.
2 Press W.
3 Press L as often as necessary, until the desired
number appears .
4 Press W to send your message.
Several recipients &
1 Press W twice and type your message.
2 Press W and enter the first telephone number.
3 Press & and enter another telephone number
(max . 10).
4 Press W to send your message.
Receiving an SMS
Received SMS messages will be printed automatical-
ly
. (You can change this setting—see Advanced set-
tings / SMS settings .) If you switch off automatic print-
ing, messages will be stored in the memory . If SMS
messages are stored, the lamp next to the W key will
flash
.
Reading an SMS
1 Press W and OK.
2 Use / to choose a message and press OK.
3 You can scroll up and down within the message with
/.
Printing an SMS
1 Press W and K.
2 Use / to choose a message and press OK.
Deleting an SMS
1 Press M, 43 and OK .
2 You can now choose which messages to delete us-
ing /:
SELECTED —press OK and choose the messages to
delete using / . Confirm with OK.
ALREADY READ—press OK to delete the messages
that you have already read .
ALL —press OK . All messages will be deleted.