Toshiba ESTUDIO 60F - Manual (Page 14)

14
2 Press a and use /, a letter or a number key to
choose a record or a list from the directory .
3 Press Y to start the transmission.
Redial L
The last ten numbers dialled on the e-STUDIO60F will
be stored in the redial memory .
1 Insert a document .
2 Press L as often as necessary. When the desired
number appears on the display, press Y to start the
transmission
.
Broadcast &
You may choose to send a document to several recipi-
ents .
1 Insert a document .
2 Dial a number (or use the directory or L) and press
&. Repeat this step for up to ten recipients. Press
Y.
3 If you want to cancel the transmission, press X
twice .
Resolution f%F
If necessary, you may change the resolution . Press
f%F as many times as necessary to select the re-
quired mode . An icon on the display will show the cur-
rent mode . If no icon is highlighted, the document will
be sent in standard resolution .
standard—for good quality documents, without draw-
ings or small details
f—for documents with drawings or small characters
%—for documents with very fine or small drawings
F—for photos
Contrast O
If the document is too light or too dark, you may
change the contrast
. Press O as many times as neces-
sary to choose the desired contrast . The current setting
is shown on the display .
Receiving faxes
If you don’t change the factory settings, faxes will be
automatically printed
. If the e-STUDIO60F has run out
of paper or ink, incoming faxes will be stored in the
memory .
After inserting paper or cartridges, start printing by
pressing Y .
To change the fax reception settings, please refer to
Advanced settings / Fax settings .
Fax answering device
The fax answering device allows you to keep docu-
ments confidential by storing them . They need not be
printed as soon as you receive them . The ; symbol on
the display lets you know the state of the fax answer-
ing device:
; on—fax answering machine is on
; blinking—documents are in the memory or are be-
ing received
; off—memory is full
You can ensure document confidentiality by using the
four-digit code . Once stored, this code is required to
print fax messages and to activate/deactivate the fax
answering device
.
Storing an answer code
Press M, 343 and OK . Enter a four-digit code and
press OK .
Activate/deactivate
Press M, 342 and OK . If you have stored an access
code, enter it and press OK . Use / to select WITH or
WITHOUT and press OK .
Printing messages
Press M, 341 and OK . If you have stored an answer
code, enter it and press OK . Documents received and
stored in the memory are printed and then deleted from
the memory
.
Send report
The e-STUDIO60F can print a transmission report every
time you have sent a document . This way you are given
confirmation that your document has been received .
1 Press M, 231 and OK . Select one of the follow-
ing options:
WITH —a report is given when the transmission was
completed successfully or when it is completely aban-
doned
.