Tandberg Data SDLT 600 - Manual (Page 29)

81-81184-02 REV A01 March 2004 3-1
C HAPTER 3
SDLT 600 Tape Drive
Specifications
This chapter describes various specifications that apply to the SDLT 600 tape drive system:
• “Product Specifications” provides tape drive specifications
• “Functional Specifications” provides functional specifications for the tape drive
• “Environmental Specifications” provides environmental specifications for operating the tape drive
• “Recording Media Specifications” provides media specifications for Super DLTtape II data
cartridges.
3.1 Product Specifications
The following subsections contain full product specifications for the SDLT 600 tape drive.
3.1.1 Host Interface
The tabletop model of the SDLT 600 tape drive has an Ultra 160 SCSI interface. The internal model
has either a Fibre Channel interface or an Ultra 160 SCSI interface. These versions provide two
possible parallel SCSI interface types and one Fibre Channel interface type that can be configured to
run at a fast speed or a low speed. For details, refer to
Table 3-1 on page 3-2 , which provides speeds
and options for the SDLT 600 tape drive interface versions.