Tandberg Data SDLT 600 User Manual
Page 100

Data Cartridge Write-protect Switch
SDLT 600 Product Manual
A-8
March 2004
81-81184-02 REV A01
Table A-1.
Write-Protect Switch Positions
Write-protect
Switch Position
Orange
Write-protect
Indicator
Result
Before Loading the Data Cartridge
Enabled
(Slide switch to left)
Visible
You cannot write data to the media. You cannot
overwrite existing data on the media. You cannot
append additional data to the media.
Disabled
(Slide switch to right)
Not Visible
Unless the data cartridge is write-protected via
firmware:
- You can write data to the media.
- You can overwrite existing data on the media.
- You can append additional data to the media.
After Loading the Data Cartridge and During Operation
If you move the
write-protect switch
from its right
(disabled) position to
its left (enabled)
position
Visible
If the tape drive is currently writing to a data
cartridge, the write-protect feature does not take
effect until after the current write operation
completes.
If you move the
write-protect switch
from its left (enabled)
position to its right
(disabled) position
Not Visible
The data cartridge becomes write-enabled after a
variable amount of seconds.