Assembly instructions – TurboChef Technologies 3240 User Manual

Page 7

INST

ALLA

TION

Assembly Instructions

The following instructions detail how to assemble the HhC 3240 oven. The oven weighs approximately 800

lbs. (363 kg). DO NOT attempt to assemble this oven with damaged or defective lifts, legs, or casters. Call

800.90

TURBO

(+1 214-379-6000) for specifi cations, pricing, and availability on lifts and lifting adapters.

1.1

Remove the oven accessories and materials from the pallet. Store all

accessories and materials in a safe, accessible place; they will be used later in the

assembly

proccess.

1.2

Remove all packaging that attaches the oven to the pallet.

1.3

Insert the lifting pole through the lifting brackets. The lifting pole must be to the

following

specifi cations:

10 feet (3.05 m) long, 1.5 inch (38.1 mm) diameter,

schedule 40 steel

1.4

Two lifts are required to lift the oven. Position the lifts

at each end of the oven and connect the lifting pole to

the lifts using the lifting adapters.

WARNING: Insert safety pins through the lifting pole (as

shown in the adjacent fi gure) or place pipe caps on the

ends (whichever applies).

Lifting Adapter

Safety Pin

STEP 1: REMOVE THE OVEN FROM THE PALLET

WARNING: The oven is top heavy and will tip. Position someone to steady the

oven during lifting as shown in

STEP

1.5 to minimize the risk of tipping.

1.5

Using the lifts, slowly raise the oven above the pallet. Keep the unit level.

Step 1.1

Step 1.2

Step 1.3

Step 1.5

Step 1.4

Steady the

Oven