Chapter 6: using the tv’s advanced features, Using the advanced picture settings features, Using dynamic contrast – Toshiba Integrated High Definition DLP Projection Televison 62HM196 User Manual
Page 54: Using cableclear, Digital noise reduction
54
HM196 (E/F) Web 213:276
Chapter 6: Using the TV’s advanced features
Using the advanced picture settings
features
Using dynamic contrast
When dynamic contrast is set to On, the TV will detect
changes in the picture quality that affect the appearance of your
contrast settings and then automatically adjust the video.
To select dynamic contrast preferences:
1
Press Y and open the Video menu.
2
Highlight Advanced Picture Settings and press T.
3
In the Dynamic Contrast field, select either On or Off.
\
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you select the Movie picture mode and then
set the dynamic contrast to On, the picture mode will
automatically change to Preference in the Picture
Settings menu (
- page 42).
Using CableClear
®
digital noise reduction
The CableClear
®
digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.
To change the CableClear settings:
1
Press Y and open the Video menu.
2
Highlight Advanced Picture Settings and press T.
3
In the CableClear field, select your desired setting.
Note:
• If the current input is ANT 1, ANT 2, VIDEO 1, or
VIDEO 2, the menu will display the text “CableClear.”
The available selections are Off, Low, Middle, High,
and Auto.
• If the current input is ColorStream HD1, ColorStream
HD2, or HDMI, the menu will display the text “DNR.” The
available selections are Off, Low, Middle, High, and
Auto. Auto will react proportionally to the strength of
the noise. Low, Middle, and High will reduce the noise
in varying degrees, from lowest to highest, respectively.
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
CH RTN
EXIT
ENTER
Picture Settings
Advanced Picture Settings
Theater Settings
Video
Back
Exit
Navigate
Select
Done
Color Management
Reset
CableClear
Auto
Dynamic Contrast
On
MPEG Noise Reduction
Low
ANT 1
Advanced Picture Settings
Color Temperature
Cool
Lamp Mode
Low Power
Game Mode
Off
Done
Reset
CableClear
Auto
Dynamic Contrast
On
MPEG Noise Reduction
Low
ANT 1
Advanced Picture Settings
Color Temperature
Cool
Lamp Mode
Low Power
Game Mode
Off
HM196_EN.book Page 54 Tuesday, May 30, 2006 2:18 PM