Toshiba Integrated High Definition DLP Projection Televison 62HM196 - Manual (Page 11)

11
HM196 (E/F) Web 213:276
Chapter 2: Using the remote control
Installing the remote control
batteries
To install the remote control batteries:
1
Slide the battery cover off the back of the remote control.
2
Install two “AA” size alkaline batteries. Match the + and
– symbols on the batteries to the symbols on the battery
compartment.
3
Slide the battery cover on to the remote control until the
lock snaps.
Caution: Never throw batteries into a fire.
Note:
• Be sure to use AA size alkaline batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
• If the remote control does not operate correctly, or if the
operating range becomes reduced, replace batteries with
new ones.
• When necessary to replace batteries in the remote control,
always replace both batteries with new ones. Never mix
battery types or use new and used batteries in combination.
• Always remove the batteries from the remote control if they
are dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid from
leaking into the battery compartment.
Remote control effective range
For optimum performance, aim the remote control directly at
the TV remote sensor. Make sure there are no obstructions
between the remote control and the TV.
16.4 ft (5m)
Point remote control
toward remote sensor
on front of TV.
HM196_EN.book Page 11 Tuesday, May 30, 2006 2:18 PM