Adjusting the picture, Selecting the picture mode, Adjusting the picture quality – Toshiba Integrated High Definition DLP Projection Televison 62HM196 User Manual
Page 42
42
HM196 (E/F) Web 213:276
Chapter 5: Using the TV’s features
Adjusting the picture
Selecting the picture mode
You can select your desired picture settings from four different
modes, as described below.
To select the picture mode:
1
Press Y and open the Video menu.
2
Highlight Picture Settings and press T.
3
In the Mode field, select the picture mode you prefer.
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note:
• The picture mode you select affects the current input
only (ANT 1 in the example above). You can select a
different picture mode for each input.
• If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change a
picture quality setting (for example, increase the
contrast or change the color temperature), the picture
mode automatically changes to Preference in the
Picture Settings menu.
• If you previously set the TV to High Bright mode, and
chose Reset in item 4 above, the TV will default to Low
Power mode. To set the TV back to High Bright mode,
see page 55.
Adjusting the picture quality
You can adjust the picture quality (contrast, brightness, color,
tint, and sharpness) to your personal preferences.
To adjust the picture quality:
1
Press Y and open the Video menu.
2
Highlight Picture Settings and press T.
3
Press B or b to select the picture quality you want to
adjust (Contrast, Brightness, Color, Tint, or
Sharpness), and then press C and c to adjust the setting,
as described in the table above.
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
The picture qualities you adjusted are automatically saved in
the Preference mode (- “Selecting the picture mode,”
above left).
Mode
Picture Quality
Sports
Bright and dynamic picture (factory setting)
Standard
Standard picture settings (factory setting)
Movie
Lower contrast for darkened room (factory
setting)
Preference
Your personal preferences
Done
Picture Settings
Mode
Sports
Contrast
100
Brightness
Reset
50
50
0
50
ANT 1
Color
Tint
Sharpness
Picture Settings
Mode: Standard
Mode
Standard
Selection
Pressing
C
Pressing
c
contrast
lower
higher
brightness
darker
lighter
color
paler
deeper
tint
reddish
greenish
sharpness
softer
sharper
Done
Picture Settings
Mode
Sports
Contrast
100
Brightness
Reset
50
50
0
50
ANT 1
Color
Tint
Sharpness
Picture Settings
Mode: Preference
Contrast
70
HM196_EN.book Page 42 Tuesday, May 30, 2006 2:18 PM