Toshiba Integrated High Definition DLP Projection Televison 62HM196 - Manual (Page 45)

45
HM196 (E/F) Web 213:276
Chapter 5: Using the TV’s features
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound. MTS also can transmit a
second audio program (SAP) containing a second language,
music, or other audio information (when provided by
individual stations).
When the TV receives a stereo or SAP broadcast, the word
“STEREO” or “SAP” appears on-screen when E is pressed.
The MTS feature is not available when the TV is in VIDEO
mode.
To listen to stereo sound:
1
Press Y and open the Audio menu.
2
Highlight Audio Setup and press T.
3
In the MTS field, select Stereo.
4
To save the new settings, highlight Done and press T.
To reset the settings to the factory defaults, highlight
Reset and press T.
Note:
• You can typically leave the TV in Stereo mode,
because it will automatically output the type of sound
being broadcast (stereo or monaural).
• If the stereo sound is noisy, select Mono to reduce the
noise.
To listen to a second audio program on an analog
station (if available):
Select SAP in step 3 above.
Note:
• A second audio program (SAP) can be heard only on those
TV stations that offer it. For example, a station might
broadcast another language as a second audio program. If
you have SAP on, you will see the current program on the
screen but hear the other language instead of the program’s
normal audio.
• If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station’s normal
audio will be output. However, occasionally there is no
sound at all in SAP mode. If this happens, set the MTS
feature to Stereo mode.
To listen to an alternate language on an ATSC digital
station (if available):
Highlight the Language field in step 3 at left, and then press
C or c to select the language you prefer.
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
1
Press Y and open the Audio menu.
2
Highlight Audio Settings and press T.
3
Press b or B to highlight the item you want to adjust
(Bass, Treble, or Balance).
4
Press C or c to adjust the level.
• C makes the bass or treble weaker or increases the
balance in the left channel (depending on the item
selected).
• c makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).
5
To save the new settings, highlight Done and press T.
To reset the settings to the factory defaults, highlight
Reset and press T.
Audio Settings
Advanced Audio Settings
Audio Setup
Audio
Done
Audio Setup
MTS
Language
Speakers On
Optical Output Format Dolby Digital
Reset
Stereo
English
Done
Audio Settings
Bass 100
Treble
Reset
100
0 Balance
StableSound Off
HM196_EN.book Page 45 Tuesday, May 30, 2006 2:18 PM