Toshiba Integrated High Definition DLP Projection Televison 62HM196 - Manual (Page 12)

12
HM196 (E/F) Web 213:276
Chapter 2: Using the remote control
Learning about the remote control
The buttons used for operating the TV only are described here.
For a complete list of the remote control’s functions, see the
remote control functional key chart (- pages 14–15).
For a list of the buttons that operate the TV Guide On Screen
™
system, see the separate TV Guide On Screen ™ Interactive
Program Guide.
Note: The error message “Not Available” may appear if you
press a key for a function that is not available.
1 SLEEP accesses the sleep timer ( - page 52).
2 POWER turns the TV on and off. When the TV is on, the
blue LED indicator on the TV front will be illuminated.
Note: The Quick Restart ™ setting will affect the amount of
time it takes for the picture to appear when you turn on the
TV (
- page 30).
3 MODE SELECT sets the four remote control device
modes: TV, CABLE/SAT, DVD, and VCR/PVR. Press
TV until the keypad blinks 3 times to control the TV.
The selected MODE key blinks each time any key is
pressed. (
- page 16).
4 Channel Numbers (0–9, –/100) directly tune
channels. The = button is used to tune digital channels
(
- page 35) or to edit the Favorite List ( - page 33).
5 INPUT selects the video input source ( - page 32).
6 FAV BROWSER accesses the Favorites List in the
Channel Browser
™ ( - page 33).
7 MENU accesses the main TV menu system ( - pages 22
and 23) or opens a menu in the TV Guide On Screen ™
system ( - TV Guide On Screen ™ Interactive Program
Guide).
8 ENTER activates highlighted items in the main menu
system and the TV Guide On Screen
™ system.
9 THINC accesses the THINC menu ( - page 24).
10 PAGE + - When the TV Guide On Screen ™ system is
open, moves from one set of screen information to the
next, when applicable.
11 TV GUIDE opens the TV Guide On Screen ™ system
( - TV Guide On Screen ™ Interactive Program Guide).
12 3 C / # c While watching TV, these buttons open the
Channel Browser banner and tune to the previous/next
channel in the channel history (- page 34). (Also see
“Arrow buttons.”)
13 Arrow buttons ( BbC c) When a menu is on-screen,
these buttons select or adjust programming menus. (Also
see 3 C / # c.)
14 VOL + - adjusts the volume level.
15 CH Bb cycles through programmed channels when no
menu is on-screen ( - page 26), and functions as page up/
down when a menu is on-screen or when the TV Guide
On Screen
™ system is open ( - TV Guide On Screen ™
Interactive Program Guide).
1
3
6
8
9
11
14
17
18
22
23
24
2
4
5
7
10
12
13
15
16
19
20
21
25
HM196_EN.book Page 12 Tuesday, May 30, 2006 2:18 PM