TOA Electronics C-DR161 CU Series - Manual (Page 77)

77
P R I O R I T Y R E C S E T T I N G
R E C S E T T I N G
P R I O R I T Y R E C I N P U T M O D E L E V E L
A U D I O O N
P O S T T I M E 1 1 1 S E C
Item Selection Description
PRIORITY REC
INPUT MODE
AUDIO
POST TIME
LEVEL / EDGE
ON / OFF
0 - (60) - 999 SEC
/ NO LIMIT
Set either "Level" or "Edge" depending on the type of signal input to the Priority
Recording Input Terminal.
For information on recording operation when the Level or Edge mode is selected,
see " Recording Operation When Edge/Level Settings Are Performed" on
page 43 .
REC SETTING Refer to p. 78 ; Recording Setting for setting selections.
Set the length of time after which Priority Recording will finish.
0-999 SEC : Records for a set period of post-alarm time. This must be
1 second or more if the Priority Recording mode is set to
"Edge," but can be set to 0 or more if this mode is set to "Level."
NO LIMIT : Priority recording continues until stopped manually.
ON: Audio is also simultaneously recorded for the duration of Priority Recording.
OFF: No audio is recorded.
Note: Underlined settings represent factory-preset settings.
* 1 If the Priority Recording mode is set to "Level," recording initiated by the Digital Video Recorder or remote controller
Priority Rec key will continue until stopped manually.
23.1. Priority recording setting
Priority recording is given higher priority over Auto-recording.
Use this recording mode to check recording details when, for
example, a suspicious person intrudes or when making
recording outside the scheduled time period. (Refer to
p. 39 ;
Priority recording.)