TOA Electronics C-DR161 CU Series - Manual (Page 32)

32
L 1
S A T J A N / 0 1 / 0 5
0 : 0 0 : 0 0
D V R N A M E
A L A R M M 1 D 1 2 H A B
C A M N A M E
11
3 4 5 6 8 10 9
2
1
7
(1) Camera number
“L” represents the live pictures. The number
indicates the input number of the camera
images.
(2) DVR name
(Refer to p. 89; DVR Name setting.)
(3) Recording status
: Indicates that normal recording is in
progress.
ALARM: Indicates that alarm recording is in
progress. The number is an alarm
input terminal number.
MOTION:Indicates that motion detected
recording is in progress. The number
is a camera number that detects
motions.
PRIOR: Indicates that priority recording is in
progress.
(4) Audio recording ON/OFF
: Audio recording enabled.
(Refer to p. 77; Priority recording setting.)
(Refer to p. 79; Auto recording setting.)
(Refer to p. 85; Pre-recording settings.)
[No indication]: Audio recording disabled.
(5) Overwrite settings
(Refer to p. 76; Recording setting.)
: Write Protect
: Overwrite
(6) Disk mode
(Refer to p. 102; Hard disk drive initialization.)
M: Mirror mode
[No Indication]: Normal mode
(7) Camera name
(Refer to p. 89; Camera name setting.)
(8) Available hard disk time
Displayed when in Write Protect mode.
(9) Fan failure
The “ ” indication lights when the fan fails.
This indication cannot be set to “Hide” in screen
display settings.
(10) Hard disk in use
Indicates the hard disk currently making
recording.
A, B *
1 : Built-in hard disk
C, D: Hard disk expansion unit 1
E, F: Hard disk expansion unit 2
* 1 “B” is not displayed for single-hard disk
models (versions with model number suffix -8,
1, D08 or D1).
One of “A”-“F” is displayed during normal
mode. Two characters from “A”- ”F” are
displayed during mirror mode.
(11) Current date and time
(Refer to p. 100 ; Date/Time setting.)
This position can be moved by settings.
Notes
• Either (1) or (7) can be displayed.
• All indications but (9) can be set to Display/Hide by
menu.
13.3. Display when in live mode
The following indications appear when in live mode.