TOA Electronics C-DR161 CU Series - Manual (Page 120)

120
Screen Display (Message) Status Action Remarks
• During Playback or Recording
• During Archiving Images
Displayed when a fan fails. Replace the fan.
Insert a new media and retry archiving. TERMINATED FOR LACK OF
AVAILABLE MEDIA SPACE Displayed during archiving
or transfer.
TRANSFER ERROR HAS
BEEN DETECTED Displayed during archiving or
transfer.
• During Equipment Maintenance
• Hard Disk Error
FAILED
Displayed when a maintenance
procedure has failed.
Retry maintenance procedure.
REGISTERED
Displayed when performing
USB key registration. Cancel the USB key and attempt
registration again.
Retry.
START AND END POSITIONS
NOT CORRECTLY SET Displayed during archiving or
transfer. Set start and end positions correctly.
• During Event Search
NOTHING FOUND
Displayed when no relevant
search data exists.
Change search conditions and retry.
• When entering a password
UNRECOGNIZED PASSWORD Displayed when an incorrect
password has been entered. Enter a correct password.
• Priority Recording and Auto Recording
MAX REC RATE EXCEEDED
Displayed if the balance of number
of cameras and recording rate has
been set inappropriately. Change the recording rate so as not to
exceed the maximum recording rate (120 IPS).
• After Setting Completion
UNIT MUST BE REACTIVATED
TO MAKE SETTINGS VALID.
REACTIVATE RIGHT NOW? Displayed after setting completion. Reactivate.
• During Playback
PLAYBACK IMAGE NOT FOUND.
STOP PLAYBACK. Displayed during playback. Press the Play-Stop key.
AN ERROR HAS BEEN DETECTED
ON THE HARD DISK.
PLEASE REACTIVATE USING THE
POWER KEY. Displayed when a hard disk
error occurs. Reactivate.
AN ERROR HAS BEEN DET-
ECTED ON THE HARD DISK.
PLEASE REACTIVATE USING
THE POWER KEY.
EXCUTE? Displayed when a hard disk error
occurs. Select recording mode (Normal or Mirror)
and then reactivate.
Displayed when a hard disk
error occurs. Press the Play-Stop key.
Error Message List
AN ERROR HAS BEEN DET-
ECTED ON THE HARD DISK
CURRETLY BEING USED
FOR PLAYBACK.
PLAYBACK WILL STOP.