Tiger NEW HOLLAND T6000 - Manual (Page 64)

ASSEMBLY
Assembly Section 2-32
DECK ATTACHMENT
Attach the head to the secondary boom using the pins and hardware shown in the Parts
Section. Install the deck pivot cylinder using the pins and hardware also shown in the Parts
Section.
Connect the fittings and hoses from the pivot cylinder to the small preformed tubes on the
boom arm. Connect the fittings and hoses from the motor to the large preformed tubes on the
boom arm. If attaching a rotary mower make sure that the hose with the red strip sticker is
attached to the motor pressure port which is marked with a red dot sticker.
Connect all remaining hoses from the control balbe to the cylinders and/or preformed tubes
on the boom arm. (ASM-C-0086)
2WD FRONT AXLE ADJUSTMENT
In order to prevent interferences with mounted equipment, the front axle on a
2WD T6000 tractor will have to be adjusteed outwards to show 2 holes on each
side (see illustration below). Double check the wheel spacing after adjustment by
oscillating and turning the tires fully for interference
..
(ASM-NH-0068)