Tiger NEW HOLLAND T6000 - Manual (Page 59)

ASSEMBLY
Assembly Section 2-27
(ASM-C-0023)
SIDE HYDRAULIC TANK INSTALLATION
Install all fittings and tubes into tank and tank filter as shown in the Parts Section illustration.
Insert tank sight glass into front side of tank.
Place the tank in the mounting bracket on the main frame as shown in the Parts Section.
Secure the tank with the tank channel mount by placing the channel mount on top of the tank and
the washers over the holes. Thread the tie bolts through the washers and holes to the threaded
holes on the main frame. Tighten the tank channel mount by using the hex heads on the end of
the tie bolts.
Install the filter gauge into the filter housing so that it points to the rear of the tractor and is
clearly visible to the operator. The tank breather cap is ready for use as the tank is filled. Some
of the for-metioned items may be already installed.
(ASM-MOTOR HYDRO-0001)