Tiger NEW HOLLAND T6000 - Manual (Page 126)

MAINTENANCE
Saber Maintenance Section 4-18
©2012 Alamo Group Inc.
MAINTENANCE
GREASING THE BOOM SWIVEL
Locate the zerks on the main swivel boss (2), main
boom pivot boss (2) and on both ends of the boom
swivel cylinder. Inject Lithium-Complex Extreme
Pressure grease conforming to NLGI2-ISO 320
specification until grease begins to protrude from
ends every 8 hours.
GREASING BOOM CYLINDER(S) PIVOT POINTS
Locate the zerk on the butt end tang of cylinder and
on rod end tang. Inject Lithium-Complex Extreme
Pressure grease confirming to NLGI2-ISO 320
specifications until grease begins to protrude from
ends. This procedure is to be used on the main
boom cylinder, secondary boom cylinder, deck
pivot, and swivel cylinders daily or at 8 hour
intervals.
BOOM SWIVEL
SABER SWIVEL
SABER SWIVEL