Assembly, Saber hose routing – Tiger NEW HOLLAND T6000 User Manual
Page 58
ASSEMBLY
Assembly Section 2-26
SABER HOSE ROUTING
(CONTINUED)
Arrange the hoses in the clamp that attaches to the boom mounting bracket as shown above,
with the 1” motor hoses closest to the main frame. Pull the hoses snug from the swivel to the
main frame clamps, when main boom is fully forward, and tighten the hoses in the clamp.
Make sure the 1” motor hoses do not kink as the boom arm is moved into the stowing
position. If this happens the motor hoses will have to be shortened, because there is too much
hose between clamps.
(ASM-SBR HOSE ROUTING-0001)