Trimble Outdoors R7 - Manual (Page 98)

9 Default Settings
8 6 Trimble R7/R8 GPS Receiver User Guide
Tr
imble R7 Operation
9.3
Resetting to Factory Defaults
To reset the receiver to its factory defaults, as defined above, do one of
the following:
• Press and hold down p on the receiver for 15 seconds.
• In GPS Configurator, select Connect to Receiver and then click Reset
receiver in the General tab.
Reference position: Latitude 0°
Longitude 0°
Altitude 0.00 m HAE
Antenna: Type Unknown external
Height (true vertical) 0.00 m
Group All
Measurement method Bottom of antenna mount
Logging rate 15 sec
Position rate 5 min
Measurement rate 10 Hz
Table 9.1 Default settings (continued)
Function Factory Default