Trimble Outdoors R7 - Manual (Page 76)

6 Transferring Data
6 4 Trimble R7/R8 GPS Receiver User Guide
Tr
imble R7 Operation
Use the USB cable to connect the receiver to the computer, as shown
in Figure 6.2.
Figure 6.2 Connecting the Trimble R7 to a computer for USB data transfer
Note – When the receiver is connected to a USB port on a computer, it
is treated as a peripheral device of the computer. If the receiver is
unplugged or powered down, a warning message is displayed on the
computer.
USB cable
USB port
USB port