Trimble Outdoors R7 - Manual (Page 24)

3 Setting up the Receiver
1 2 Trimble R7/R8 GPS Receiver User Guide
Tr
imble R7 Operation
3.1
Introduction
This chapter provides general setup information, connection
information, and cabling diagrams for the most common uses of the
Trimble R7 receiver.
3.2
Parts of the Receiver
All operating controls, ports, and connectors on the receiver are
located on its four main panels, as shown in Figure 3.1. This section
provides a brief overview of the features of each of these panels.
Figure 3.1 Panels on the Trimble R7 receiver
Bottom
panel
Top
panel
Front
panel
Rear
panel