Logging/memory led, Sv tracking led, Logging/memory led sv tracking led – Trimble Outdoors R7 User Manual
Page 52: Tr imble r7 operation

4 General Operation
4 0 Trimble R7/R8 GPS Receiver User Guide
Tr
imble R7 Operation
43.1
Logging/Memory LED
The yellow Logging/Memory LED below the
d button indicates the
status of data logging and memory usage.
43.2
SV Tracking LED
The red SV Tracking LED below the SV icon
indicates the status
of satellite tracking.
Fast flash
alternates rapidly between being lit and unlit
On
is lit
Off
is unlit
Behavior
Meaning
On
Data is being logged.
Slow flash
Enough FastStatic data has been logged. Alternatively, if
the red SV Tracking LED is on solid at the same time, the
receiver is in Monitor mode, and is checking for new
firmware to install.
Fast flash
Data is being logged but memory is low.
Flash
The receiver is in Sleep mode, and will wake up five
minutes before the scheduled start time of a timed
application file.
Off
Data is not being logged, or the CompactFlash card is
full.
Behavior
Meaning
Slow flash
Tracking four or more satellites.
Fast flash
Tracking three or fewer satellites.
Off
Not tracking any satellites.
On
The receiver is in Monitor mode, and is checking for new
firmware to install.
The term …
means that the LED …