Toshiba TP 50H60 - Manual (Page 6)

6
INTRODUCTION
CHAPTER 1 INTRODUCTION
Antenna/Cable TV
Connections
• You can use either an indoor or outdoor antenna to receive VHF and UHF channels.
• Channels 2-13 are VHF channels, and channels 14-69 are UHF channels.
• We recommend using an outdoor antenna for better picture quality.
• You can receive Cable TV by connecting the cable supplied by your local cable
company.
Types of antenna cables
Shown below are two basic types of antenna cables.
Signals from a home antenna may be conveyed by either type. Cable TV
signals are conveyed by a 75 ohm coaxial cable.
1 A 75 ohm coaxial cable is generally a round cable with F-type
connectors that can easily be attached to a terminal without tools.
2 A 300 ohm cable is a flat “twin-lead” cable that can be attached to a
terminal using the supplied antenna adapter.
Antenna connection panel
There are two separate 75 ohm F-type connector input terminals and a
converter output terminal as shown at the left.
The ANT-1 and ANT-2 terminals are for connecting a VHF/UHF antenna
or cable TV system. The signal input through ANT-1 is output from the
OUT terminal whenever the RF switch on the TV is in the ANT-2 position.
You can switch between the ANT-1 and ANT-2 inputs in the ANT 1/2
menu or with the ANT/VIDEO button on the TV. See page 21.
F-type connector (Not supplied)
ANT( 75 )
ANT-1
OUT
ANT-2
TV rear