Teledyne C-2000 - Manual (Page 10)

NOTE 5: The current link is displayed on the top of the
“Main” menu in inverse video. You may switch to
an alternate link by simply pressing the “6” key
until the desired available link is displayed on
the top of the menu.
NOTE 6: To setup a “TDD” call you may press “5”
whether or not it is displayed. Air-Ground
NOTE 7: The following dialing formats will be accepted by
the MagnaStar for all communication links:
Direct Billing
Area code + Number
“1” + Area code + Number
“00” + Country Code + City Code + Number
“011” + Country Code + City Code + Number
Credit Billing
“0” + Area code + Number
“000” + Country Code + City Code + Number
“01” + Country Code + City Code + Number
3
(Rev. 8/04)
®
Voice — —>1
Inplane —>2
FAX — —>3
Modem —>4
Satcom —>6
HF Radio —>7
Aircalls —>8
Setup — —>9
OPER — —>0
Spd Dial —>*
Air-Ground
Main Menu