Quatech WLNG-ET-DP500 Series - Manual (Page 93)

Quatech, Inc. Company Confidential
100-8081-100 Airborne CLI Reference Manual 93
eth-gateway
Command eth-gateway
Arguments [Valid IP address]
Device Type Ethernet
Default 192.168.2.1
Description Configures the IP address of the Ethernet gateway.
This is the IP address used by the client to communicate with the gateway (module).
The IP address of the client and the Ethernet gateway must be in the same subnet for IP routing to
work correctly.
 The subnet for the wired IP and gateway IP addresses (Ethernet) and public IP address
(802.11), obtained by the module via the wireless interface, and must not be the same.