Quatech WLNG-ET-DP500 Series - Manual (Page 49)

Quatech, Inc. Company Confidential
100-8081-100 Airborne CLI Reference Manual 49
13.0 Power Save
Control of the operating and standby power of the module can be critical in many
applications; the Airborne Enterprise Device Server family offers various levels of control
through the CLI interface, the following power save options are currently supported.
Table 16 – Power-Save Modes
Command Description
radio-on Enables power to the 802.11b/g radio. The radio will utilize the power profile
defined by pm-mode.
After this command is issued the radio will initiate and attempt to locate a
valid wireless network to associate with. If one is found it will attempt to
associate/authenticate.
radio-off Disables power to the 802.11b/g radio.
After the command is issued the device server will close all TCP/IP and UDP
connections and power down the radio. When in this state the device server
will no longer be associated with a wireless network and any network based
communication will not be possible.
pm-mode
Set’s the device server power management mode. Currently supports the
modes described in Table 17.
Table 17 - pm-mode Parameters
Mode CPU OSC/PLL Radio Wakeup
active ON ON ON None.
doze STOP ON PSPoll
UART/Serial Traffic or directed/broadcast radio
packet.
Radio wakes on DTIM Period.