Quatech WLNG-ET-DP500 Series - Manual (Page 53)

Quatech, Inc. Company Confidential
100-8081-100 Airborne CLI Reference Manual 53
get-cert
Command get-cert
Arguments [ASCII Text – filename]
Device Type All
Default [blank]
Description Will cause the device server to retrieve a certificate for the FTP server identified in the parameters
defined by the following commands:
ftp-server-path
ftp-server-address
ftp-user
ftp-password
ftp-filename
Once the download is complete it is necessary for the save command to be issued, this will cause the
certificate to be stored to the device server.
For the Serial/UART/SPI device servers it is required that the device is associated and authenticated with
a network and has a valid IP address before issuing this command.
The Ethernet Bridge server supports the use of this command over the wired interface.