Quatech WLNG-ET-DP500 Series - Manual (Page 79)

Quatech, Inc. Company Confidential
100-8081-100 Airborne CLI Reference Manual 79
default-cfg
Command default-cfg
Arguments none
Device Type All
Default [blank]
Description This will set the module configuration to the factory default settings.
The settings in memory will be set to default values. You must commit the changes if you desire them
to remain in the default state after a module restart.

All user settings will be lost if you issue this command and commit the changes. This
will potentially make the device server unable to connect to valid wireless network or
communicate over the serial interface.
Make sure that the factory default settings are known before issuing this command.