Quatech WLNG-ET-DP500 Series - Manual (Page 92)

Company Confidential Quatech, Inc.
92 Airborne CLI Reference Manual 100-8081-100
eth-ip
Command eth-ip
Arguments [Valid IP address]
Device Type Ethernet
Default 192.168.2.100
Description Configures the IP address of the wired interface client.
If the wired interface client is using DHCP, the module will lease this address to the client in response
to the DHCP request.
If the client is not using DHCP, this address must match the static IP address on the client so that IP
routing will work correctly.
The IP address of the client and the Ethernet gateway must be in the same subnet for IP routing to
work correctly.

The subnet for the wired IP and gateway IP addresses (Ethernet) and public IP address
(802.11), obtained by the module via the wireless interface, and must not be the same.