Quatech WLNG-ET-DP500 Series - Manual (Page 29)

Quatech, Inc. Company Confidential
100-8081-100 Airborne CLI Reference Manual 29
Figure 4 - Bridging From a TCP Connection on the wl-tunnel-port
8.1.4 Bridging Using UDP
The Module supports UDP tunneling. This allows the Module to forward data
from the serial interface to a specific server listening on a specified UDP port or
to broadcast a UDP datagram on a specific UDP port. This also allows the
Module to forward data received on its specified UDP receive port to the serial
interface. The UDP port tunneling feature is configurable via the wl-tunnel,
wl-tunnel-mode, wl-udp-xmit, wl-xmit-type, wl-udp-rxport, wl-
udp-port, and wl-udp-ip CLI commands.
Whenever the CLI Server transitions to PASS Mode either via the startup
serial-default parameter or the pass command, the Module will use the
UDP tunneling configurations to operate the UDP data bridge as follows: