Quatech WLNG-ET-DP500 Series - Manual (Page 42)

Company Confidential Quatech, Inc.
42 Airborne CLI Reference Manual 100-8081-100
Command Description
get-cert
Will cause the device server to retrieve a certificate from the
FTP server identified by the parameters associated with the
following commands:
ftp-server-path
ftp-server-address
ftp-user
ftp-password
ftp-filename
Once the download is complete it is necessary for the save
command to be issued, this will cause the certificate to be
stored to the device server.
No file path should be included.
It is required that the device server is associated and
authenticated with a network and has a valid IP address before
issuing this command.
ftp-server-address This defines the IP address of the target FTP server. The
address must be in the standard format XXX.XXX.XXX.XXX.
Where XXX can have a value between 1 and 254.
ftp-server-path This defines the directory path for the subdirectory that
contains the target certificate to be downloaded.
This does not need to be set if the file is in the default directory
for the specified ftp-user.
ftp-user
Defines the username for the FTP account, associated to the
FTP server defined by ftp-server-address.
ftp-password Defines the password for the FTP account, associated to the
FTP server defined by ftp-server-address.
ftp-filename
Defines the name of the certificate or private key file to be
uploaded or downloaded. The file extension must be included.
The filename does not support wildcards.
The use of these commands depends upon the transfer protocol being used.