Quatech WLNG-ET-DP500 Series - Manual (Page 28)

Company Confidential Quatech, Inc.
28 Airborne CLI Reference Manual 100-8081-100

The data bridge may terminate for any one of the following reasons:
The close CLI command is issued from a secondary network CLI
session.
The radio-off CLI command is issued from a secondary network
CLI session.
The network server or host terminates the TCP/IP or UDP session.
The TCP/IP connection inactivity timer (wl-tcp-timeout) expires.
The escape sequence is detected.
After the data bridge is terminated, the CLI Session on the serial interface
remains in LISTEN Mode and escape detection is enabled if configured.
Using the following sequence, a user can configure the Module to operate in TCP
tunneling mode: