Quatech WLNG-ET-DP500 Series - Manual (Page 90)

Company Confidential Quatech, Inc.
90 Airborne CLI Reference Manual 100-8081-100
telnet-port
Command telnet-port
Arguments disable | enable
Device Type Ethernet
Default enable
Description Enables or disables access to the modules telnet port via the wireless interface.
This is similar to port filtering, when enabled the module will transfer all telnet (port 23) traffic to its
internal IP stack, when disabled all telnet traffic will be forwarded to the wired interface.
disable
The module will transfer all telnet (port 23) traffic to the wired Ethernet
interface.
enable The module will transfer all telnet (port 23) traffic to its internal IP stack.

Disabling the telnet-port will prevent any telnet (port 23) connections from being
accepted by the module, limiting telnet connection for CLI session to the wired
interface only. This will restrict the management options available
.